Gps - Sony Xperia miro Test Instructions

Tests: Service Tests
Step 5: Input the password to get connection with the
available Wi-Fi;
Step 6: Select the target Wi-Fi to check the status of
connection.
If the phone is able to scan, detect and connect to a
network, the Wi-Fi function is regarded to be fully functional.
Press the Back key to return to Service Test Menu.

2.2.14 GPS

Verify that the GPS function properly:
Step 1: Go to GPS test;
Step 2: The phone will be searching for available satellites
and in'Position Getting' status in 5 minutes;
Step 3: The GPS Data (Longitude, Latitude, Altitude,
Acquired Time, Satellites Used, Pseudorandom
Noise(PRN) code and Signal to Noise Ratio(SNR)) could
be shown if GPS test works successfully.
If the positioning time is over 5 minutes and does not get
location info, the test is failed.
Press the Back key to return to the Service Test Menu.
For GPS testing, refer to1220-1333: Generic Repair
Manual - mechanical
1266-5135 Rev 1

Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
SONY
XPERIA
SONY
XPERIA
SONY
GPS
GPS Is opening...
GPS retrieving location info
XPERIA
12(22)