Fan Headers - Biostar I945G-M7 User Manual

2.2 FAN H
EADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Header
JSFAN1: System Fan Header
Note:
The JCFAN1 and JSFAN1 support system cooling fan with Smart Fan Control utility. It
supports 4-pin and 3-pin head connector. When connecting with wires onto connectors,
please note that the red wire is the positive and should be connected to pin#2, and the
black wire is Ground and should be connected to GND.
I945G-M7
JCFAN1
4 1
JSFAN1
3
8
Pin Assignment
1 Ground
2 Power
3 FAN RPM rate
sense
4 Smart Fan
Control
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate
sense
1