Biostar I915P-A7 Bios Setup Manual page 11

1915P-A7 BIOS Manual
3.1 CPU FEATURE
3.1.1 Delay Prior to Thermal
Set this item to enable the CPU Thermal function to engage after the specified time.
The Choices: 4, 8, 16 (default), 32.
3.1.2 Thermal Management
Allow you to choose the thermal management method of your monitor.
The Choices:Thermal Monitor 1 (default), Thermal Monitor2.
Notes:The choices will be different according to your CPU features.
3.1.3 TM2 Bus Ratio
Represents the frequency. Bus ratio of the throttled performance state
that will be initiated when the on-die sensor goes from not hot to hot.
The Choices: 0X (default).
3.1.4 TM2 Bus VID
Represents the voltage of the throttled performance state that will be
initiated when the on-die sensor goes from not hot to hot.
The Choices:0.8375 (default).
3.1.5 Limit CPU ID Max Val
Set limit CPU ID maximum vale to 3, it should be disabled for Win XP.
The Choices: Disabled (default), Enabled.
3.1.6 NX BIOS Control
When disabled, forces the NX feature flag to always return o.
The Choices: Disabled (default), Enabled.
10