Bios Setup - Biostar I915P-A7 Bios Setup Manual

1915P-A7 BIOS Manual

BIOS Setup

Introduction
This manual discussed Award™ Setup program built into the ROM BIOS. The Setup program
allows users to modify the basic system configuration. This special information is then stored
in battery-backed RAM so that it retains the Setup information when the power is turned off.
The Award BIOS™ installed in your computer system's ROM (Read Only Memory) is a
custom version of an industry standard BIOS. This means that it supports Intel Pentium
processor input/output system. The BIOS provides critical low-level support for standard
devices such as disk drives and serial and parallel ports.
Adding important has customized the Award BIOS™, but nonstandard, features such as virus
and password protection as well as special support for detailed fine-tuning of the chipset
controlling the entire system.
The rest of this manual is intended to guide you through the process of configuring your
system using Setup.
Plug and Play Support
These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD
(Extended System Configuration Data) write is supported.
EPA Green PC Support
This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.
APM Support
These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management (APM)
specification. Power management features are implemented via the System Management
Interrupt (SMI). Sleep and Suspend power management modes are supported. Power to the
hard disk drives and video monitors can be managed by this AWARD BIOS.
ACPI Support
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface
specification (ACPI).
configuration capabilities as defined in the ACPI specification, developed by Microsoft, Intel
and Toshiba.
It provides ASL code for power management and device
1
®
4