Nokia RH-77 Troubleshooting Manual page 7

Nokia Customer Care
9. Enter 10, 13, 12, and 8 in the PIN # fields.
10. Select the boxes in the Enable column for each pin.
11. Click the Get All button.
12. Ensure that all of the pins have a value of H in the State column. (Click the L
values to change them to H values.)
13. Adjust the following PDM field values on the RF PDM dialog box:
Tx IF AGC = -280
•
Tx RF AGC = -280
•
Issue 01 04/2005
Figure 6: General I/O dialog box for Tx troubleshooting
©2005 Nokia Corporation
RF Description and Troubleshooting
Company Confidential
2118 (RH-77)
Page 7