Compliant Printer - Sony DSC-H20 Cyber-shot&reg Handbook

Printing images directly using a
PictBridge compliant printer
Even if you do not have a computer, you can print images shot using the camera by connecting
the camera directly to a PictBridge compliant printer.
"PictBridge" is based on the CIPA standard. (CIPA: Camera & Imaging
Products Association)
Note
• You cannot print movies.
Preparing the camera
Prepare the camera for USB connection to the printer, using the cable for multi-use terminal.
1 Insert the sufficiently charged battery pack into the camera.
2 Connect the camera to the printer.
1 To the USB jack
3 Turn on the printer.
After the connection is made, the
If the indicator flashes on the screen of the camera (error
notification), check the connected printer.
Note
• If it was impossible to connect to the printer, be sure to set [USB Connect] under
[PictBridge].
Cable for multi-use terminal
indicator appears on the screen.
2 To the multi
connector
indicator
(Main Settings) to
122 GB