Advertisement
Quick Links
Para obtener una versión gratis de este manual en español, escriba a la dirección
indicada más abajo. Asegúrese de indicar el modelo y el número de serie de su producto.
Pour obtenir gratuitement une version en français de ce manuel, écrivez à l'adresse
ci-dessous. N'oubliez pas d'indiquer les numéros de modèle et de série de votre produit.
The Toro Company, Attn: Parts Dept., 8111 Lyndale Ave S, Bloomington, MN 55420–1196
Keep this material with your Operator's Manual and refer
to both documents for instructions concerning safe
operation and proper maintenance procedures.
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near
any area of potential danger. Replace any decal that is damaged or lost.
ON REAR OF MOWER
(Part No. 100–1175)
Kit Contents
DESCRIPTION
Discharge Tunnel Assembly
Spring
Spring Bracket
Grass Bag Assembly
Decal
The Toro Company
– 1998
All Rights Reserved
SUPER RECYCLER MOWER
BAGGING KIT
MODEL NO. 59193
MODEL NO. 59194
IMPORTANT: Your Recycler mower has been
updated to permit bagging. Make sure that your dealer
is aware of this whenever parts are ordered or
servicing is required.
BY DISCHARGE TUNNEL
Assembly
Installing the Discharge Tunnel
QTY.
1
Note: Determine the left and right sides of the mower by
standing behind the handles.
1
1. Disconnect the spark plug wire.
1
2. Remove and save the four bolts securing the Recycler
1
cover and deflector assembly to the mower (Fig. 1).
Save the parts for future use.
2
1
FORM NO. 3322–311
INSTALLATION
INSTRUCTIONS
(Part No. 99–6018)
Printed in USA
Advertisement
Related Manuals for Toro SUPER RECYCLER 59193
Summary of Contents for Toro SUPER RECYCLER 59193
- Page 1 Pour obtenir gratuitement une version en français de ce manuel, écrivez à l’adresse ci-dessous. N’oubliez pas d’indiquer les numéros de modèle et de série de votre produit. The Toro Company, Attn: Parts Dept., 8111 Lyndale Ave S, Bloomington, MN 55420–1196 Keep this material with your Operator’s Manual and refer...
- Page 2 HOW TO AVOID THE HAZARD If the spring contacts any part of engine, do not install the bagger kit on the mower and contact an Authorized Toro Service Dealer before proceeding. Installing the Bagging Decal 1. Thoroughly clean the flat area of the mower behind the discharge tunnel and to the left of the tunnel with soap and water, then dry thoroughly.
- Page 3 (Fig. 6). injury or death to the operator or bystanders. HOW TO AVOID THE HAZARD Check the grass bag frequently. If it is damaged, install a new Toro replacement bag. DANGER POTENTIAL HAZARD Thrown objects may result if the discharge door does not close completely.
- Page 4 Blade Brake Clutch mechanism may have occurred, which could result in an unsafe operating condition. Have mower inspected by an Authorized Toro Service Dealer. Maintenance Cleaning Always ensure that the discharge tunnel door closes when the handle is released.