Setting The Security Function - Sony VAIO VGP-UHDP04 Operating Instructions Manual

Setting the security function

Notes
• Do not disconnect the USB cable when the wireless keys are being registered.
• Be sure that the computer is not in power save mode when the wireless keys are being
registered.
• You need to register both wireless keys.
• Be sure that the ACCESS indicator goes out before registering the wireless key.
1
2
3
12
Turn on the computer and connect the hard disk drive using
the USB cable (page 8).
Press the REGIST button.
The blue light of the wireless key receiver flashes.
z
Tip
If you do not touch the wireless key receiver with a wireless key for more than about
5 seconds, the blue light of the wireless key receiver will go out and the previous
status returns.
Touch the wireless key receiver with one of the wireless
keys.
The LOCK and UNLOCK indicators flash alternately, then the
wireless key is registered to the hard disk drive.