About The Dell Xc6320; About Your System; Accessing System Features During Startup - Dell XC6320 Owner's Manual

About the Dell XC6320

About your system

The Dell XC6320 system is a web-scale converged appliance based on the Dell PowerEdge C6320 and
supports 512 GB memory (with 32 GB RDIMMs), six hard drives per node, and up to four nodes per
chassis.

Accessing system features during startup

The following keystrokes provide access to system features during startup.
NOTE: The hot keys of SAS or SATA card or PXE support are available in BIOS boot mode only.
There is no hot key to boot in the the UEFI mode.
F2 Enters the System Setup program.
F11 Enters the BIOS Boot Manager.
F12 Starts Preboot eXecution Environment (PXE)/iSCSI boot.
Ctrl +C Enters the LSI 2008 SAS Mezzanine Card Configuration Utility. For more
information, see the SAS adapter documentation.
Ctrl+R Enters the PERC 9 Card Configuration Utility. For more information, see the
documentation for your SAS RAID card.
Ctrl+Y Enters the MegaPCLI SAS RAID Management Tool.
Ctrl+S Enters the utility to configure onboard LAN settings for PXE boot. For more
information, see the documentation for your integrated LAN.
Ctrl+I Enters onboard SATA Controller's Configuration Utility.
Ctrl+D Enters the Intel iSCSI setup menu.
1
7