Entering System Setup; System Setup Details; System Bios Settings Details - Dell XC6320 Owner's Manual

NOTE: Help text for the selected field is displayed in the graphical browser by default. To view the
help text in the text browser, press F1.
You can access system setup by using two methods:
• Standard graphical browser—The browser is enabled by default.
• Text browser—The browser is enabled by using Console Redirection.

Entering System Setup

1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
If your operating system begins to load before you press F2, wait for the system to finish booting,
and then restart your system and try again.

System Setup details

The System Setup Main Menu screen details are explained as follows:
System BIOS Enables you to configure BIOS settings.
iDRAC Settings Enables you to configure iDRAC settings.
The iDRAC settings utility is an interface to set up and configure the iDRAC
parameters by using UEFI (Unified Extensible Firmware Interface). You can enable
or disable various iDRAC parameters by using the iDRAC settings utility. For more
information about this utility, see Integrated Dell Remote Access Controller User's
Guide at Dell.com/idracmanuals.
Device Settings Enables you to configure device settings.

System BIOS Settings details

The System BIOS Settings screen details are explained as follows:
System Specifies information about the system such as the system model name, BIOS
Information version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor Settings Specifies information and options related to the processor such as speed and
cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
Boot Settings Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify
UEFI and BIOS boot settings.
Network Settings Specifies options to change the network settings.
Integrated Specifies options to manage integrated device controllers and ports and specify
Devices related features and options.
21