BenQ SE2241 Product Service Manual page 21

(7) OSD Control flow
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Picture
(For Video
Colour Temperature
sources)
Aspect Ratio
Backlight
Senseye
Backlight
Contrast
Brightness
Sharpness
Colour Temperature
Picture
Aspect Ratio
(Only for PC
Backlight
input)
Auto Adjust
H-Position
V-Position
Size
Phase
Sound Mode
Balance
Bass
Audio
Treble
AVC
Audio Only
Clock
Off Time
On Time
Time
Sleep Timer
Auto Sleep
Time Zone
Picture effect selections on Dynamic (default), Standard, Mild, User
Adjust the White levels (0~100)
Adjust the Black levels (0~100)
Adjust the Color levels (0~100)
Adjust the Tint levels (-50~ 0~ + 50)
Adjust the Sharpness levels (0~100)
Color temperature selections on Normal(default), Warm, Cool ,User
Selections the Image Size on Full (default) ,Zoom1, Zoom2,Panorama ,
Auto,and4:3
Control brightness via back light adjustment
ACE Advance Contrast Enhance (Standard/ Low /Off/Auto/ High)
Noise Reduce Noise reduce level setup on Off (default), Low, Middle, High
Skin Tone Skin color adjust (0~10)
Control brightness via back light adjustment
Adjust the White levels (0~100)
Adjust the Black levels (0~100)
Adjust the Sharpness levels (0~100)
Color temperature selections on Normal(default) , Cool , User,Warm,
Selections the Image Size on Full (default) , and4:3
Control brightness via back light adjustment
To auto adjust picture's H. / V. Position, phase and clock
Adjust the horizontal position of image
Adjust the vertical position of image
Adjust the horizontal size
To adjust the delay time of phase to reduce the noise of picture
Sound effect selections on Standard (default), Music, Movie, Sports,and User
Adjust the Speak output levels (-50~ 0~ + 50)
Adjust the Low Frequency levels (0~100)
Adjust the High Frequency levels (0~100 )
Turn on or turn off the Auto Volume Control
Turn on or turn off the audio only function.
Set date and time
Set a routine time for power off
Set a routine time for power on
Set a timer for sleep mode. The power will be turned off if the timer is
timeout
If auto sleep is turned on and no input signal, it will go to the sleep mode
after approximately 10 minutes.
Time zone selection.
21