Maintenance And Care - Bissell 23T6 Series User Manual

Maintenance and care

Using your pet hair eraser sweeper
1. Make sure that the Pet Hair Eraser
Sweeper is in the "OFF" position.
2.
With the sweeper facing toward you,
lift the dirt cup out by lifting up on
the scoop handle.
3.
Carry the dirt cup to a waste
container. Using one finger push
down on either of the corner tabs on
the bottom corners of the dirt bin.
This dirt bin is spring loaded and will
open allowing dirt to fall into waste
container.
4. Close bottom of dirt cup. Replace the
dirt cup by gently pressing it into the
foot of the sweeper. Make sure that it
fits securely.
5.
Clean exterior surfaces with a soft
cloth dampened with water only. Do
not use a strong detergent or other
cleaner – this may damage the finish.
Always unplug the Pet Hair Eraser
Sweeper from the electrical outlet
before cleaning the surface.
battery removal and disposal
NoTe: It is required that the battery
be removed from the pet hair eraser
sweeper before it is disposed of.
1.
Important: Unplug charger.
2.
Remove handle and dirt cup.
3.
Remove (10) Phillips head screws
on the bottom cover as shown in
picture.
4. Separate top and bottom cover.
5. Remove wire connectors from the
battery pack.
6. Keep battery pack together – DO
NOT separate individual batteries.
For specific disposal instructions,
please contact your local authorities
for requirements and regulations on
safe disposal or recycling facilities in
your area.
7.
Discard remainder of product.
6
w w w . b i s s e l l . c o m
2.
warNINg:
This product contains a rechargeable nickel cad-
mium battery (sometimes referred to as a "NiCd"
battery) pack. The average life of a NiCd battery
is 5 to 7 years, depending on frequency of use.
Proper removal and disposal of NiCd batteries is
required.
3.
10 Screws
waRning:
To reduce the risk of electric shock, turn
power switch OFF and disconnect char-
ger from electrical outlet before perform-
ing maintenance or troubleshooting.
1 - 8 0 0 - 2 3 7 - 7 6 9 1