M-Audio OXYGEN25 User Manual page 7

4. Keybed: The velocity-sensitive keyboard is not only the primary method of sending Note On/Off
and velocity data when performing. It is also used to access extended programing functions
listed along its upper edge.
Hold SHIFT and press a labeled key to access these additional programming functions:
Note: The Key modifiers are dependent on what mode is currently active. For example, if
Smart Chord mode is active, the only Shift modifier functions will be available for the
Smart Chord functionality.
Arpeggiator Parameters:
•
ARP CTRL (Arpeggiator Control): Control Arpeggiator settings for the following
parameters:
UP, DOWN, INCL, EXCL, ORDER, RANDOM, and CHORD: Selects in which order notes
will sound when the keys are pressed.
•
GATE: Controls the length of the arpeggiated note.
•
SWING: Controls the rhythm deviation of the arpeggiated notes.
•
OCT 0, OCT 1, OCT 2: Controls how many octaves will be played in the arpeggiated
pattern.
•
TIME DIV (Time Division): Determines the timing and rhythm for the note repeat and
arpeggiator features. Control Arp, and Note Repeat Time Division settings for the following
parameters: 1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, 1/32, 1/32T.
Smart Chord and Scale Parameters:
•
KEY: Selects which key the notes will use in the chosen Smart Chord or Smart Scale.
Control Key settings for the following parameters: C, Db, D, Eb, E, F, Gb, G, Ab, A, Bb, B.
•
VOICING (Smart Chord Mode only): Selects which type of full chord will be played when a
single key is pressed.
Control SMART CHORD settings for the following parameters: 1,3,5; 1,3,7; 1,3,5,7; 1,5,9;
1,5,12; 3,5,1; 5,1,3; RANDOM.
•
TYPE: Selects which key and type of musical scale will be used when using the SMART
CHORD or SMART SCALE feature.
Control Smart Chord MODE settings for the following parameters: MAJOR, MINOR,
CUSTOM.
Control Smart Scale MODE settings for the following parameters: MAJOR, PENTATONIC
MAJOR, MINOR, MELODIC MINOR, HARMONIC MINOR, PENTATONIC MINOR,
CUSTOM DORIAN, CUSTOM BLUES.
MIDI Channel and Velocity Parameters:
•
CHANNEL DOWN, UP: Selects which MIDI channel will be used to transmit for the keys,
pads, or controls.
•
VELOCITY: Changes the Velocity Curve for the keys or pads depending on which controls
were last pressed.
To access additional features, refer to the software Preset Editor at m-audio.com.
7