Pre-Operation; Fuel - Echo PB-600 Operator's Manual

6. Move handle (E) to desired position. Tighten knob (H) hand tight
and tighten clamp screw (D).
7. Assemble straight pipe (J) to pipe with swivel (C), turning straight
pipe counter-clockwise to lock in place. Assemble straight pipe to
straight pipe the same way.
8. Make sure all clamps are tight.
P -O
RE PERATION

FUEL

Fuel Requirements
R + M
Gasoline - Use 89 Octane [
quality. Gasohol may contain up to 10% Ethyl (grain) alcohol or 15%
MTBE (methyl tertiary-butyl ether). Gasohol containing methyl (wood)
alcohol is NOT approved.
Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD Standard
(ISO/CD 13738), must be used. Echo brand Premium 50:1 oil meets this
standard. Engine problems due to inadequate lubrication caused by
failure to use an ISO-L-EGD approved oil, such as Echo Premium 50:1
Two-stroke Oil, will void the two-stroke engine warranty. (Emission
related parts only are covered for two years, regardless of two-stroke
oil used, per the statement listed in the EPA Phase I/California Emission
Defect Warranty Explanation.)
Mixing - Follow directions on the oil container.
] gasoline or gasohol known to be good
2
P B
OWER LOWER
O ' M
PERATOR S ANUAL
E
H
D
J
C
15