Activating/Deactivating Airbags - Fiat DOBLO 2016 Owner's Handbook Manual

NOTE The "Scheduled Servicing Plan"
includes vehicle maintenance at fixed
intervals; refer to the "Maintenance and
care" chapter. This message is
displayed automatically when the key is
turned to MAR, starting at 2,000 km
(or equivalent value in miles) from when
the next service is due and reappearing
every 200 km (or equivalent value in
miles). Below 200 km servicing
indications are more frequent. The
display will be in km or mi depending
on the settings of the unit of
measurement. When the next
scheduled service is approaching, the
word "Service" will appear on the
display, followed by the number of
kilometres or miles left, when the key is
turned to MAR. Go to a Fiat Dealership,
where the "Scheduled Servicing Plan"
operations will be performed and the
message will be reset.
Activating/deactivating
front passenger side
airbag and side bag for
chest/head protection
(for versions/markets, where provided)
This function is used to activate/
deactivate the front and side passenger
airbags (for versions/markets where
provided).
Proceed as follows:
– press the MENU button and
then, after displaying the message "Bag
pass: Off" (to deactivate) or "Bag pass:
On" (to activate) by means of the
and buttons, press the MENU
button again;
– the confirmation request message
appears in the display;
– by pressing the or buttons
select (Yes) (to confirm activation/
deactivation) or (No) (to cancel);
– press the MENU button briefly: a
message confirming the selection will
be displayed and you will return to
the menu screen or, pressing the button
for longer, you will return to the
standard screen without saving.
Daytime running lights
(DRL)
With this function it is possible to turn
the daytime running lights on and off.
Proceed as follows to activate or
deactivate this function:
– press the MENU button briefly to
display a submenu;
– press the MENU button briefly to
make the display flash On or Off
according to the previous setting;
– press the or button to select;
– press the MENU button briefly to
return to the submenu screen or hold
the button down to return to the main
menu screen without saving;
– hold the MENU button down
again to return to the standard screen
or to the main menu according to
where you are in the menu.
Exit Menu
This is the last function that closes the
cycle of settings listed in the menu
screen.
Pressing the MENU button briefly
will return the display to the standard
screen without storing.
Press button to return to the first
menu item on the display (Speed
Beep).
79