Table of Contents
Advertisement
7.
The following option menu is displayed:
L = Write NVRAM
F = Write Flash
W = Copy Flash to file: QLxxROM.SAV
S = Display serial number
V = Display current BIOS version
C = Verify Flash
X = Verify NVRAM
Y = Display port name
Enter Option prompt, type l
8.
At the
9.
At the DOS prompt, type the following command and press Enter:
flasutil /i
Enter adapter I/O address prompt, type the same I/O address that you typed in step 5 on
10. At the
page
14
The following option menu is displayed:
L = Write NVRAM
F = Write Flash
W = Copy Flash to file: QLxxROM.SAV
S = Display serial number
V = Display current BIOS version
C = Verify Flash
X = Verify NVRAM
Y = Display port name
Enter Option prompt, type f
11. At the
12. For each additional option that you want for the same I/O address, repeat step 8 on page 15
11 on page
substituting the option letter for f
15
13. Repeat step 4 on page 14
14. Remove the diskette from the diskette drive and restart the blade server.
15
and press Enter.
and press Enter.
through step 12 on page
15 for the second I/O address.
.
through step
Advertisement
Table of Contents
