Table of Contents
Advertisement
The following illustration shows the components on the bottom of the Expansion Card.
Figure 2. Expansion Card (bottom)
PCI-X connector (J3): This connector is a 64-bit PCI-X interface with a 200-pin board-to-board connector
that is connected to the blade server.
Fibre Channel high-speed connector (J2): Communication signals are routed from the blade server through
the Fibre Channel high-speed connector on the Expansion Card to switch-module bay 3 and bay 4 in the SBCE
unit.
6
Intel Blade Server FC Expansion Card SBFCM: Installation and User's Guide
Advertisement
Table of Contents
