Installing Or Replacing Batteries - BenQ PB6100 User Manual

4. PRESET
Users can switch 4 kinds of preset modes. The preset mode changes each time when you
press PRESET button
• PC Signal:
Presentation Mode (Default) --> Vivid Mode --> Video Mode --> Economic Mode
• YPbPr/ S-Video/ Video Signal:
Gaming Mode (Default) --> Video Mode --> Cinema Mode --> Economic Mode
5. PIP SOURCE
User can activate PIP and select the source between S-Video and Video while the input
source is PC. The PIP source changes in the order of S-Video, Video, and off.
6. PIP POSITION
While PIP is activated, you can select one of the nine positions.

Installing or Replacing Batteries

1.
2.
3.
Avoid excessive heat and humidity. There may be danger of an explosion if batteries are incor-
rectly replaced. Replace only with the same or equivalent type recommended by the manufac-
turer. Dispose of used batteries according to the manufacturer's instructions.
10 Introduction
Use a pointy-sided
stick to release the
barttery tray. Pull
the tray off.
Install or replace a battery.
Snap the battery tray back into
place.