Setting The Presentation Timer - BenQ MS612ST User Manual

7. Repeat steps 3 to 6 for other color adjustments.
8. Make sure you have made all of the desired adjustments.
9. Press MENU/EXIT to exit and save the settings.

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/
ENTER to display the Presentation Timer page.
2. Highlight Timer Period and decide the time period by pressing
time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-
minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press
the screen by press
Selection
Always
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
4. Press
5. Press
direction by pressing
Selection
Count Up
Count Down
6. Press
reminder by pressing
last 30 seconds of counting down/up, and a triple beep sound will be produced when
the timer is up.
7. To activate the presentation timer, press
MODE/ENTER.
8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the
projector or remote control to confirm. You will see the message "Timer is On"
displaying on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight Off. Press
MODE/ENTER. A confirmation message displays.
2. Highlight Yes and press MODE/ENTER to confirm. You will see the message "Timer is
Off " displaying on the screen.
30 Operation
to highlight Timer Display and choose if you want the timer to show up on
/
ing
Description
Displays the timer on screen throughout the presentation
time.
Hides the timer throughout the presentation time.
to highlight Timer Position and set the timer position by pressing
Top-Left Bottom-Left
to highlight Timer Counting Direction and select your desired counting
/
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
to highlight Sound Reminder and decide if you want to activate sound
/
.
Top-Right
.
. If you select On, a double beep sound will be heard at the
and press
/ . The length of
Bottom-Right
/ to highlight On and press
/
.