BenQ MS500 User Manual page 42

Function
Baud Rate
Test Pattern
Closed
Caption
Standby
Settings
Reset All
Settings
42 Operation
Selects a baud rate that is identical with your computer's so that you can
connect the projector using a suitable RS-232 cable and update or
download the projector's firmware. This function is intended for
qualified service personnel.
Selecting On enables the function and the projector displays the grid test
pattern. It helps you adjust the image size and focus and check that the
projected image is free from distortion.
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
make the connection.
Audio Pass Through
Selecting On enables the function. The projector can play sounds when
it is in standby mode. Connect the correct signal cable and connect the
audio cable to the AUDIO IN jack. See
to make the connection.
Enabling this function slightly increases the standby power
consumption.
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User 1, User
2, Language, Projector Position, High Altitude Mode, Security
Settings and Baud Rate.
Description
"Connection" on page 15
"Connection" on page 15
for how to
for how