BenQ V2400W User Manual page 25

Senseye Demo Displays the preview of
screen images under the
selected mode from
Picture Mode. The screen
will be divided into two
windows; the left window
demonstrates images of
Standard mode, while the
right window presents the
images under the specified
mode.
Display Mode This feature is provided to
allow aspect ratio's other
than 16:10 to be displayed
without geometric
distortion.
• Overscan -Slightly
enlarges the input image.
Use this feature to hide
annoying edge noise if
present around your
image.
• Full - Scales the input
image to fill the screen.
Ideal for 16:10 aspect
images.
• Aspect - The input image
is displayed without geo-
metric distortion filling
as much of the display as
possible. 16:9 images will
fill the screen horizon-
tally while 4:3 images
will fill the screen verti-
cally.
• 1:1- Displays the input
image in its native
resolution without scal-
ing.
AMA Improves the gray level
response time of the LCD
panel.
1:1 display mode
supports up to 1600 x
1200 @ 60 Hz, except
1600 x 1000 @ 60 Hz.
Press the or keys to
change the settings.
Press the ENTER key to
select this option. Press
the or keys to
change the settings.
The options under
Display Mode will be
different depending on
the input signal
sources.
Press the ENTER key to
select this option. Press
the or keys to
change the settings.
• ON
• OFF
When the signal
source is from a
DVI or D-sub
source, and the
input image is of
non-wide aspect
ratio:
• Full
• Aspect
• 1:1
Or
When the signal
source is from a
HDMI source:
• Overscan
• Full
• Aspect
• 1:1
• ON
• OFF
How to adjust your monitor 25