Audio Button; Autoscan; City X/K/Ka - Beltronics Vector 945 Owner's Manual

You'll notice an "As " (AutoScan
(Highway mode), "Cx " (City mode) or "CA"
(City ALL) remains dim to confirm your
unit is receiving power. To return to a full
bright setting, press the DARK button a
third time; two "beeps" confirm this
selection. Use of the DARK button does
not affect audio alerts.
Important—if you press the the DARK
button and do not receive audible
confirmation, the audio level has been set
too low.
AUDIO (Auto-Mute/Volume Control) Button
Manual Muting of Audio Alerts
(Radar and SWS TM )
Whether Auto-Mute is selected on or off in
Selectable Features, the audio alerts can be
completely muted by pressing the AUDIO
button during an alert. The display will
briefly show "QUIET". No audible alert will
be heard as long as the signal is present.
The unit will remain in manual mute mode
for approximately 12 seconds from the last
received alert.
Note—because Laser alerts are not
lengthy or sustained, muting is not
required (see page 21)
Controls and Features
Volume Control
), "H"
TM
Press and hold the AUDIO button to
engage the volume control; the volume will
cycle high to low.
Release the AUDIO button when you
have reached your desired audio setting.
CITY (City/Highway) Button
The CITY button has four functions:

1. AutoScan

2. Highway Mode
3. City X Filtration Mode
4. City X/K/Ka Filtration Mode
AutoScan
V945
engaged. Autoscan
automatically adjust sensitivity to X and K
Band Radar whatever your driving
environment. Whether driving in densely
populated urban areas or "wide open" rural
areas, AutoScan
virtually all false signals which are shared
with traffic Radar on X and K Bands such as
door openers and security systems.
AutoScan
achieving optimum signal selectivity.
10
TM Mode
TM Mode
is factory shipped with AutoScan
TM is designed to
TM will automatically reject
is a "no-fuss" means of
TM
TM