Manual Registration To Align Front And Back Images - Ricoh Pro C9200 Series Tips

RICOH Iro C9200 Series Tips on High Quality Irint

Manual Registration to Align Front and Back Images

To execute Registration to Align Front and Back Images manually, while checking the result of
printing on the actual paper, make adjustments if the image position on the surface is deviated
from the across feed/paper feed direction.
Adjusting image position
(1) Check the paper feed direction and side 1/2 of duplex output. Paper feed direction decides
which side of the paper is 1 or 2. See the below illustrations.
1-sided print: Face down
A: Side 1 B: Paper feed direction of side 1
(2) At first, check the paper and data used for printing.
Checking paper:
Using a ruler, measure the size of the four sides of the paper
used for printing and the angle of the corners. When the paper
size differs from that custom paper size, the custom paper size
is modified according to the actual size and register it.
You can grasp skew in advance by checking angles of the four corners.
1-sided print: Face up
Iaper
2-sided print: Face down
C: Side 2 D: Paper feed direction of side 2
40
April.15, 2019
2-sided print: Face up