Ricoh Pro C9200 Series Tips page 12

RICOH Iro C9200 Series Tips on High Quality Irint
(2) Press the elevator switch in red frame. LED lamp flashes and goes out after 10 seconds.
(3) Open the cover after LED lamp of the button to move the bottom plate down goes out
completely.
(4) Open the upper cover of the 2-tray.
(5) Hold the paper widthwise and load it little by little.
(6) After loading it, align the side fence to the paper width. Check that the paper is correctly
positioned against the back of the paper tray with the label on which is printed the paper
If you load thin paper or coated paper, load it little
by little. Be careful while you load it so that the pa-
per loaded in the bottom is not dragged.
12
April.15, 2019