Fujitsu BS2000 SE Series Operating Manual page 62

Additive Components
Actions via the OCP
Some actions can be executed on the tape library using the OCP (and also via the RMU):
Opening a mailslot (menu
Unlocking a magazine (menu
Moving cartridges between the slots (menu
Initiating an inventory (menu
When the Move Media action is started, the tape library closes Random Mode and operates in Sequential Mode.
Once the operation has been completed, it switches back to Random Mode. This behavior is logged on the BS2000
system, see section "Modes of the tape library"
i Detach the device while BS2000 is operating (
OCP.
Shutdown
Pressing the Power On/Off button will initiate a controlled Power Down of the unit.
The following operations will take place before the library shuts down completely:
The LCD display indicates with an appropriate message that the shutdown is in progress
The library finishes all ongoing library and drive activities
The robotics is moved to its home position
The library switches off the power supply's secondary side
i To abort the shutdown process the user has to press the CANCEL buttor within the first 3 seconds.
Commands > Open Mailslot
Commands > Unlock Magazines
Commands
Commands > Reinventory
.
/DETACH-DEVICE
)
)
> Move Media )
)
) before you execute actions via the
62