Fujitsu BS2000 SE Series Operating Manual page 59

Additive Components
Input modes
There are several modes to enter values in the different menu items. These values are: selectable predefined
values, toggle values (e.g. On/Off) and numerical values such as network addresses.
Selectable predefined values
After the menu item has been reached, the various predefined values can be selected using the UP and DOWN
keys (arrow up, arrow down). When the required value has been selected, it is entered by pressing the ENTER key.
Toggle values
Toggle values are used to switch between two different states like On and Off. After navigating to the menu item the
display shows the actual state. Pressing the ENTER button will toggle to the possible new state. Pressing the
ENTER button a second time will take over this new state.
Numerical values
Numerical values are needed for network addresses, PIN entries, and other configuration entries. After navigating
to the menu item to be changed, the actual value will be displayed and the cursor stays on the first digit. The value
may be incremented / decremented with the UP and DOWN button. After pressing the ENTER button the cursor is
set to the next editable digit. It can be changed in the same way. After pressing the ENTER button at the last digit
the complete entry will be stored. Pressing the CANCEL button will cancel the whole edit process and the old value
is valid again.
59