Belkin F6C110-RKM-2U User Manual page 14

OmniGuard
CAUTION!
be enabled in the same time. Then the shutdown message
just can be sent out to the client station. Please check the
"Broadcast" page in the manual to enable this function.
Shutdown Delay Time: When AC fails, the PC client shutdowns delay time.
Step 2:
Once the initial settings are done, you can launch the application.
Select the Launch Application option that will start the SNMP service and establishes the
connection between the UPS and the system, also start other required programs like
"Apache server". You shall see minimized DOS prompts to check that all applications are
started.
Broadcast receiver
Sub Manager
Apache Web Server
NOTE!
Setting Screen will be added. So if any user forgets to open
the Settings Screen, changes can be made here for
required parameters. This screen will be launched the very
first time, there after it will not be launched.
Close the screen, if settings are already established.
NOTE!
SNMP service, by going to below pathway. Go to control
panel/administrative tool/services and select SNMP service
and Stop the service, before launching the above
TM
UPS Power Management Software
The OmniGuard
When launching first time, features in the Pop-Up
For Windows 2000™, please stop the Windows'
TM
broadcast function must
14