Typical Application Configuration; Data Collection - Delta DX-2100 Series User Manual

D X-2 100 Se ri es Ind ustr ia l 3G C lo ud Ro u ter
2.3

Typical application configuration

DX-2100 is an industrial-grade cloud router, providing users an easiler and faster experience of remote data collection
and remote device debugging.
2.3.1

Data collection

_2
DX router can connect to the Slave via serial port or Ethernet port, router with more than 2000 built-in registers, supporting
standard Modbus RTU ASCII and Modbus/TCP protocol, and Mitsubishi MC and Siemens TCP protocol, to collect,
receive and upload data to the cloud in the master-slave mode.
The basic steps of data collection are as follows:
1. Register DIACloud Account
Cloud account is an important credential of DX router ownership. When the router is bound with a DIACloud account,
only the account or the sub-account authorized by the account can access the device remotely. All data uploaded by
the router belongs to this account, which can only be accessed by this account or sub-accounts authorized by this
account. If you haven't had a cloud account, follow these steps to register:

Browsing DIACloud website (http://www.DIACloudSolutions.com), click "CREATE AN ACCOUNT".
2 - 1 2