Using The Baby Monitor; Setting Up; Pan And Tilt; Night Vision Mode - Motorola MBP855CONNECT User Manual

3. Using the Baby Monitor

3.1

Setting Up

• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's camera by using the pan and tilt function
(the arrows on the right and left side of the Parent Unit) to move up, down,
left, and right until you are satisfied with the image shown on the Parent Unit
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2

Pan and Tilt

The camera can be remotely controlled from the Parent Unit when in a camera
viewing mode.
1. Press the + UP button or - DOWN button on the left side of the Parent
Unit to tilt the camera up or down.
2. Press the < LEFT button or > RIGHT button on the right side of the Parent
Unit to pan the camera left or right.
3.3

Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the Unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
top of the Parent Unit screen.
3.4

Talk Mode

Press and hold the TALK button
the Baby Unit's loudspeaker. The
Parent Unit screen.
Using the Baby Monitor
T
on the Parent Unit to talk to your baby through
T
will be displayed at the top center of the
icon will be displayed at the
15