Parent Unit Power Supply - Motorola MBP855CONNECT User Manual

2.2

Parent Unit Power Supply

IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium
ion battery 2000mAh, to give up to 5 hours monitor operation), please charge it
for 16 hours before initial use. The battery is not a user-accessible item. Please
contact the helpline if you think it needs replacing.
1. Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable electrical outlet. Only use the enclosed
power adapter (5V DC / 1000mA) with the DC plug.
2. Press and hold the 0 POWER ON/OFF button for 3 seconds to switch ON
the Parent Unit, if it has not turned on automatically.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the color video captured by the Baby Unit. If the baby's room
is dark, the video will display in black and white, with a
due to the infra-red illumination by the Baby Unit.
4. If there is no connection or you are out of range, the video display will go
off, a symbol will appear on the screen, and the Parent Unit will beep
repeatedly. Move the Parent Unit closer to the Baby Unit until the link is re-
established.
5. Press and hold the 0 POWER ON/OFF button, until the progress bar
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon
unit will beep every 15 seconds. This alert user that the battery needs to be
charged. The parent unit will take 16 hours to charge fully.
12
turns RED to indicate the battery is low and the parent
icon showing,
Getting Started