The Site Survey Tab - Belkin F5D6050 User Manual

The Site Survey Tab

Clicking on the Site Survey Tab will display a list of all available access points in your area. The following information
about each is displayed:
a
b
c
(a) BSSID – The MAC address of the access point
(b) SSID – The Service Set Identifier (wireless network name) of the access point.
(c) Signal Strength – The signal strength of the related access point. This is a "snap-shot" of the signal strength at the
time of the site survey. Pressing the "Rescan"
(d) BSS – Displays the mode that the access point is operating in: Infrastructure or AD-Hoc
(e) Encryption – Will display "No" when encryption is disabled, 64-bit when 64-bit encryption is enabled and 128-bit
when 128-bit encryption is enabled.
(f) Channel number – The current operating channel of the access point
(g) Rescan – Rescans for available wireless access point and wireless routers.
(h) Apply – Double click on a BSSID
router.
TIP-> Double-clicking on the BSSID and clicking Apply
network. To check the area for more access points, click "ReScan".
(g) button may get a different result.
(a) and click Apply (h) to select an available wireless access point or wireless
(h) of an access point will make the Adapter join that particular
h
d
e
f
g