Adding Computers To Your Network - Belkin F7D4301 User Manual

GeTTInG sTaRTeD

adding Computers to Your network

Wireless devices such as computers, network printers, and gaming
systems can connect to your Router with a few simple steps .
Using the CD
1 . Put the Setup CD into your computer . If the CD
doesn't open automatically, browse to your CD
drive and open the Belkin Setup CD icon .
2 . Click the Setup icon on the CD menu .
3 . After a brief installation, the setup software will ask you for the
network name and password from the network information card
that came with your Router . This card is most likely now located
underneath the foot of your Router in the provided card slot .
4 . A progress screen will appear while additional software is
installed . This may take a few minutes to complete . Once
finished, a "Success" message will appear indicating that you
are connected to the Internet via your new Belkin Router .
note: The setup software runs only on
Windows and Mac OS X systems .
9