Adding Computers To Your Network - Belkin N150 User Manual

GeTTInG sTaRTeD

adding Computers to Your network

Wireless devices such as computers, network printers, and gaming
systems can connect to your Router with a few simple steps.
Using the CD
1 . Put the Setup CD into your computer. If the CD
doesn't open automatically, browse to your CD
drive and open the Belkin Setup CD icon.
2 . Click the Setup icon on the CD menu.
3 . After a brief installation, the setup software will ask you for the
network name and password from the network information card
that came with your Router. This card is most likely now located
underneath the foot of your Router in the provided card slot.
4 . A progress screen will appear while additional software is
installed. This may take a few minutes to complete. Once
finished, a "Success" message will appear indicating that you
are connected to the Internet via your new Belkin Router.
note: The setup software runs only on
Windows and Mac OS X systems.
10