Belkin F5D7230-4 Supplementary Manual page 4

Testing the Wireless Bridge
You can test to see if your wireless bridge is working by doing a simple PING test. You will need
a computer with Windows 98, 98SE, Me, 2000, NT, or XP. If you are running Mac OS, you will
need to aquire a PING utility. If you are using any other OS, you may need a PING utility or
there may be one built in. The following directions are for Windows OS, but the same method
can be used on other operating systems with a PING utility.
1. Open a Command window. click Start then Run. In Windows 98, 98SE, Me type the word
"Command" in the Run field. For Windows 2000, NT or XP type "CMD". This will open a
Command window on the desktop.
2. In the command window type "PING 192.168.2.254" This is the IP address of the
secondary Access Point. If you changed the IP address of the Access Point, then use
that IP address.
3. If everything is working fine, you will see "Reply from 192.168.2.254: bytes=32
time=12ms TTL=255" four times on the screen. The test is complete.