Advertisement
Recommended tools
The procedures in this document may require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Philips #2 screwdriver
● Plastic scribe-Recommended for field technician
● T-30 torx screwdriver
Screw List
The following table shows the screw list and the images for different components.
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Side cover
M.2 2280 Solid-state drive
WLAN card
System Fan
Processor fan and heat-sink assembly
Front I/O panel
System board
Disassembly and reassembly
Screw type
M6-32x12.7
M2x3.5
M2x3.5
#6-32
#6-32
#6-32
#6-32
Quantity
Image
1
1
1
1
4
1
8
Disassembly and reassembly
2
7
Advertisement
