Advertisement
Steps
1. Insert the intrusion switch into its slot and slide the switch to secure it into the slot.
2. Connect the intruder cable to the connector on the system board.
Next steps
1. Close the
PSU cage
2. Install the
side
cover.
3. Follow the procedure in
Front I/O panel
Removing the IO panel
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Open the
front
bezel.
4. Open the
PSU
cage.
About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
41
Advertisement
