TELUS PureFibre Internet Installation Manual page 5

Connect the Power Adaptor Cable to the
2d
TELUS Wi-Fi Hub and plug it into a wall outlet.
While the TELUS Wi-Fi hub will initializes,
the lights will flash, and turn red for about
30 seconds. When complete, the Internet
2e
light on the front of the device will be
green, and the Wi-Fi light in the lid will
be blue. If either light stays red after
5 minutes, call TELUS for help.
TELUS Wi-Fi Hub Placement
Place the TELUS Wi-Fi Hub in the open
■
Ensure it is not behind thick walls or heavy
■
objects that may block the Wi-Fi signal
Ensure the back of the device has good
■
ventilation so it does not overheat
Reconnecting Cables
If you were replacing an existing modem, now reconnect any cables that were connected to the
LAN or COAX ports on the old device to the same ports on the new TELUS Wi-Fi Hub.
Back of
Internet Light
Wi-Fi Hub
TELUS
Power input
Wi-Fi
Wi-Fi Light
4