Step 2: Connect The Fibre Terminal To The Wi-Fi Hub - TELUS PureFibre Internet Installation Manual

Step 2: Connect the Fibre Terminal to the Wi-Fi Hub

Make sure the Fibre Terminal is
powered on and connected to fibre.
2a
There should be a fibre line coming in.
If there is no fibre line coming in,
please call TELUS for help.
Check the front of the Fibre Terminal
that the correct lights are on. If no
lights are on, make sure the device is
2b
plugged into a power outlet. If the
lights indicated below are not green,
please call TELUS for help.
Use the Ethernet cable included in your kit to connect
the yellow LAN/WAN (4) Port on the TELUS Wi-Fi Hub
to Data 1 or LAN 1 on the Fibre Terminal.
Nokia Fibre Terminal
2c
POTS 1 POTS 2 DATA 1 DATA 2 DATA 3 DATA 4
Alcatel Fibre Terminal
POTS 1 POTS 2 LAN 1 LAN 2
ON/OFF POWER
Fibre Terminal
Nokia
PWR, NTWK and MGMT
lights are green.
Alcatel Fibre Terminal
POWER and WAN lights are green.
Back of
LAN 3 LAN 4 ON/OFF POWER
TELUS Wi-Fi Hub
3