Table of Contents
Advertisement
Replacing the rear window wiper blade
Proceed as follows:
❒ raise cover A fig. 205, undo nut B and remove arm
C;
❒ correctly position the new arm, fully tighten nut B
then lower cover A.
fig. 205
SPRAY NOZZLES
Windscreen washer
The window washer jets A fig. 206 are fixed. If there
is no jet of fluid, firstly check that there is fluid in
the reservoir (see paragraph "Checking fluid levels"
in this chapter).
Then check that the nozzle holes are not clogged;
use a needle to unblock them if necessary.
IMPORTANT In versions with a sun roof, make sure
that the sun roof is closed before operating the
window washer jets.
fig. 206
F0Y0208
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Y0209
235
Advertisement
Table of Contents
