Table of Contents
Advertisement
❒ press-fit the hub cap, aligning the special splining
(on the cap) with the inflation valve;
GETTING TO KNOW
YOUR CAR
❒ using the wrench provided, tighten the fixing studs;
❒ lower the car and remove the jack;
❒ using the wrench provided, fully tighten the studs
SAFETY
in the sequence shown previously.
Versions with alloy wheels
STARTING AND
Proceed as follows:
DRIVING
❒ insert the wheel on the hub and using the wrench
provided tighten the studs;
❒ lower the car and remove the jack;
WARNING LIGHTS
❒ using the wrench provided, fully tighten the 5 studs
AND MESSAGES
in the sequence shown;
❒ reinstall the hub cap, taking care to position the 3
plastic pins in the dedicated seats on the wheel.
IN AN
EMERGENCY
Slightly press the cap to prevent any damage to the
plastic pins.
IMPORTANT If it is not fitted properly, the hub cap
SERVICING AND
may detach itself when the car is running.
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
180
After tyre replacement
❒ stow the space-saver wheel in the compartment
provided in the boot;
❒ insert the jack and the other tools in the
container;
❒ arrange the container and tools on the space-saver
wheel;
❒ correctly reposition the boot stiff cover.
Advertisement
Table of Contents
