Belkin ExpandView F1D068 User Manual page 8

Hardware Installation
Cascading Multiple ExpandView
The ExpandView
™
images will be displayed on.
• To cascade ExpandViews
the Video Out port of another ExpandView
The following Belkin cable may be used to cascade the ExpandView
VGA Compatible Monitor Extension Cable with Thumbscrews,
6 feet (1.8 meters) (Belkin Part# F2N025-06-T)
High Density DB15 Male to High Density DB15 Female straight-through
monitor extension cable with Thumbscrews, 6 feet (1.8 meters)
Setting the Gain
The ExpandView ™
settings: Lo and Hi.
• Lo (default) - Use the Lo setting when the cables being used to connect
monitors to the ExpandView
the ExpandView
• Hi - Use the Hi setting when the cables being used to connect monitors to
the ExpandView
ExpandView ™ is being cascaded with other ExpandViews
setting if the Lo setting does not produce clear and colorful images.
may be cascaded to increase the number of monitors that
, connect the Video In port of one ExpandView
™
has a slide switch on the bottom of the unit that has two
are 6 feet - 25 feet (1.8 - 7.6 meters), or when
™
™ is not being cascaded.
are greater than 25 feet(7.6 meters), or when the
™
(continued)
s
™
™ .
6
™
:
™
™ . Only use this
to