Storing Stations/Programmes; Stereo Reception; Display - Grundig WKC 1705 RDS Manual

Manual frequency setting
Press the button " PTY briefly in the range
DX m
FM (VHF): "MAN " in the display,
then press the " button – frequency
button – frequency
"
Press button briefly: incremental change.
Press button longer: quick change.
Switching over from manual to automatic
search:
– automatic after approx. 60 seconds, or
" PTY
– press the button briefly, or
DX m
– select another range, or
– press a memory button.
Announcement stand-by for
traffic announcements
when "TP " is in the display.
"
TP on/off:press button briefly.
TP
– You hear traffic announcements at a
minimum volume, even when the volume
is at zero.
– If you only want to hear traffic
announcements, turn the volume down to
r
zero with the -multi-function control.
– If the stored station can no longer be
received, the automatic search function
starts seeking the next traffic station.

Storing stations/programmes

You can store the station or programme you
are listening to
– in a selected range, e.g. RDS l
+
– with the memory buttons
–
– with ("TP " in the display) or without
"announcement stand-by for traffic
announcements".
Storing
Press a memory button, e.g.
tuned station or programme becomes
audible again.
The stored station remains in memory even
if the supply voltage is disconnected.
Calling up a stored station/programme
Select a range, e.g. RDS l.
Press memory button, e.g.

Stereo reception

When
Manual switching to mono:
Press the
" "
to ,
1 6
Switching back to stereo:
Press the

Display

" ,until the
1
Memory position, e.g.
"
briefly.
1
RDS programme name
or range and frequency
or functions, e.g. "SAFE "
Important information:
RDS (Radio Data System),
TP (Traffic Programme),
EON (Enhanced Other Network) and
reception conditions, page 15.
6
Radio
is in the display.
" MONO
button briefly
AS
"
MONO button briefly
AS
"
3
Range, e.g. RDS ll
Traffic Programme
(traffic announcements)
Highest search
sensitivity
Stereo reception