How Will You Use Your Dx500; Psu (Power Supply Unit); Warranty; Packing - Behringer DX500 User Manual

2.2 How will YOU use YOUR DX500?

Your DX500 is a creative instrument. Learn to play it well. If possible, experiment with it "off-line" – before you
use it in earnest in a club or studio. It offers you many creative music mixing possibilities, with its ultra
DJ-friendly control surface. In addition many special features have been included to enhance the flexibility,
creativity and ease of operation of your mix. For example, the on-board CD quality digital sampler lets you
capture and edit a sound with instant replay available at the touch of a button. Loop a breakbeat, stutter a vocal
hook, trigger an ambient effect. Also you might notice that kill switches are included on every channel, making
professional sounding dub EQ effects child's play. But first connect the external power supply unit to the PSU
input of your DX500, plug it in and switch it on
We have given particular attention to metering your music with PFL offered on every channel
channels have clip LEDs
the switches on your DX500 have an associated status LED, to let you know when it is engaged. Just another
way in which we try to make life easier for you, the DJ.

2.3 PSU (Power Supply Unit)

Any amplifier circuit is limited in its transient response by the available current. Every mixer has numerous
line level operational amplifiers (op-amps) inside. When being driven hard, many desks begin to show signs
of stress due to power supply limitations. Not so with the PRO MIXER DX500. The sound will always stay
clean and crisp right up to the operating limits of the op-amps themselves, thanks to our generous 30 W
external power supply unit.
Please connect the PSU with the PRO MIXER DX500 PSU connector
and turn it on with the POWER ON switch
+
Do not connect the PSU to the PRO MIXER while the PSU is connected to the mains supply.
Connect switched-off desk and PSU first before you connect the PSU to the mains supply.

2.4 Warranty

Please take time to have the warranty card filled out completely by your specialized dealer and return it within
14 days after the date of purchase, so as to be entitled to benefit from our extended warranty. You will find the
serial number of your DX500 on the rear panel.

2.5 Packing

Your BEHRINGER PRO MIXER DX500 was carefully packed in the factory and the packaging was designed to
protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging
and its contents for any signs of physical damage, which may have occurred in transit.
+
If the unit is damaged, please do not return it to us, but notify your dealer and the shipping
company immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.

3. INPUT CHANNELS

Plug a phono (turntable) or line source (CD player etc.) into an appropriate input
microphone into the DJ mic input
volume to check out and set up the channel.
,
The mic pre-amp is of the same quality as those found in our award-winning EURODESK
studio consoles. This gives an incredibly warm, clear and noiseless performance. Mic inputs
are on balanced XLR and 1/4" jacks respectively. Balanced operation gives best noise
performance. Unbalanced microphones need to have XLR pins 1 and 3 shorted.
(always use this sequence).
constantly looking for input overload distortion. You will also see that many of
.
on the front panel (if required). Play music or speech at a typical
3. INPUT CHANNELS
. In addition all
on the rear panel of your mixer
. Plug a dynamic
E
9