Usb Operation - Dual XDM290BT Installation & Owner's Manual

XDM290BT
Connecting a
USB Device
(sold separately)
Playing Music
Track Select
Fast Forward and
Reverse
File Search
12
OPERATION

USB Operation

To play MP3 files from most USB mass storage devices,
line up the USB connector and insert the USB device into
the unit's USB port.
When a USB device is first connected, "USB READ"
will appear in the display and playback will begin
momentarily. Depending on the number of files and
folders, it may take several seconds for the device
to begin playing. If no valid MP3 files are detected,
"NO FILE" will be displayed and the last mode will be
resumed.
Press TRACK
track. Press TRACK
the current track. Pressing TRACK
the beginning of the previous track.
Press and hold TRACK
forward or reverse a track.
Pause Press
Press
Press SELECT to enter the file/folder search mode. A list
Step 1 of all the folders from the USB device will be displayed.
Note: Any files located in the root directory will be
located in the folder named "ROOT". Press SELECT to
view the files on the root folder.
Step 2 Turn the volume knob to cycle through all the folders
on the device and press SELECT to choose the desired
folder. The list of files in the selected folder will be
displayed. Turn the volume knob to cycle through the list
of files.
Note: Pressing GO BACK when viewing the contents of a
folder will return to the list of folders on the USB device.
Press GO BACK again to exit the search menu.
Step 3 Once the desired song is displayed, press SELECT to
begin playback of the desired song.
Note: Due to differences in USB device transfer speeds,
it is recommended to limit each folder to less than 30
songs.
ll
to skip to the beginning of the next
nn
ll
l
/ II to temporarily stop USB playback.
l
/ II again to resume playback.
to return to the beginning of
nn
again skips to
nn
or TRACK to fast