Oki B2200 Maintenance Manual page 100

Web Browser
SNMP Setting
SNMP Read
Community Setting
SNMP Write
Community Setting
HUB Link Setting
Web Printer Setup (Web)
(Port No: 80)
Web
SNMP
Local Ports
Password Setting Password Change
43641601TH Rev.1
NIC Setup Tool
SNMP v 1
-
DISABLE
public
-
public
-
AUTO
NEGOTIATION
100BASE-TX FULL
-
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
ENABLE
DISABLE
1
80
-
65535
ENABLE
-
DISABLE
ENABLE
-
DISABLE
Last 6 digits of
Ethernet address
Value
Sets the version of the SNMP used.
Sets the Read Community used in the SNMP
v 1. Up to 15 alphanumeric characters can be
entered.
Sets the Write Community used in the SNMP
v 1. Up to 15 alphanumeric characters can be
entered.
Sets HUB link setting (transmission method
and rate). It should normally be set to AUTO
NEGOTIATION.
Sets whether to enable/disable access
through a Web browser in the printer.
Sets a port number to gain access to the Web
page for the printer.
Note that the following port numbers cannot
be set because the unit already uses them.
Port numbers: 23, 515, 9100, 161, 9966
Sets whether to enable/disable access
through SNMP in the printer.
Select ENABLE for normal use.
Sets whether to enable/disable a unique
protocol.
Changes the administrator's password. Up to
15 alphanumeric characters can be entered.
Case sensitivity is on. If the password is
forgotten, it cannot be changed.
Oki Data CONFIDENTIAL
Description
100 / 100