Table of Contents
Advertisement
11. Transmission Method
The next step is the selection of the transmission
method. Select your scanning preference to install
channels for Live TV function. TV and Cable options
will be available.
After selecting an option, the TV will search for digital
terrestrial or digital cable broadcasts. Select the
searching method and press Select to start search.
While the search continues you can press the Select
button to cancel. A dialogue will be displayed for
confirmation. Highlight Yes and press Select to cancel.
When the initial setup is completed the results will be
displayed. You can choose to make changes on the
channel list or rescan at this point. Highlight Done and
press Select to finish the setup.
Home screen will be displayed. In order to switch
to Live TV mode and watch TV channels highlight a
channel from the On Now row on the Home screen or
from the Antenna Channels row on the Live screen
and press Select to start watching. These rows will not
be available if no channels are installed.
Main Screen
To enjoy the benefits of your Amazon Fire TV, your TV
must be connected to the Internet. Connect the TV to a
home network with a high-speed Internet connection.
You can connect your TV wirelessly or wired to your
modem/router. Refer to the Network Menu and
Connecting to the Internet sections for further
information on how to connect your TV to the internet.
The main screen is the centre of your TV. Press the
Home button on your remote to display the main
screen. From the main screen you can start any
application, switch to a TV channel, watch a movie or
switch to a connected device, manage the settings.
Depending on your TV setup and your country
selection in the initial setup the main screen may
contain different items.
The main screen is organized into several tabs. Home,
Live, Your Videos, Movies, TV Shows, Apps and
Settings tabs will be available. You can scroll through
them using the directional buttons. Available tabs may
differ depending on the network connection status of
your TV and whether you signed in to your Amazon
account. Move the focus to the desired tab option to
display the content. Available options of the highlighted
tab will be positioned in rows generally. To navigate
through the options use the directional buttons on
the remote. Select a row then move the focus to the
desired item in the row. Press Select button to make
a selection or to enter a sub-menu.
The main screen will be opened with the Home tab. On
the upper side of the screen, search tool will be located
along with other tab options. You can choose either to
type a word to start a search via the virtual keyboard
or try voice search option (if your remote has a built-
in microphone). Press and hold the Voice button on
your remote (if available) and speak to start a search.
Live TV
Live TV refers to channels that have been tuned in via
an aerial or cable connection. There are several ways
to watch Live TV channels. You can press the Live TV
button on the remote to switch to Live TV mode and
watch TV channels. You can also highlight the Aerial
option from the Inputs row on the Home screen and
press Select or highlight a channel from the Recent
or On Now row on the Home screen and press Select
to start watching.
If the channel installation is not completed On Now
row will not be available and Live TV menu will be
displayed when the Live TV button is pressed or Aerial
input option is selected.
Customising TV Settings
Adjusting the Picture Settings
Allows you to set your preferred picture settings. You
can access the picture settings menu via the Settings
menu on the main screen or by pressing and holding
the Home button for about 2 seconds while viewing
any input.
Accessing Picture Settings via Settings Menu
Press the Home button, scroll to Settings tab and
press the Select button. Scroll to Display & Sound
option and press the Select button. Scroll down to
Picture Settings option and press the Select button.
Scroll down to select the input that you want to adjust
the picture setting of and press Select button. The TV
will now change to the selected input. The Picture
Settings menu will appear on the right hand side of
the screen.
Accessing Picture Settings while watching the TV
While watching the input that you would like to adjust
press and hold the Home button for 2 seconds. The
quick settings menu will appear on the right hand side
of the screen. Scroll down and highlight Picture then
press Select. The picture setting options will appear
on the right hand side of the screen.
Picture Menu Content
The following options show all the available picture
setting adjustment on your TV.
Picture settings are input-specific and all of these
settings will not apply to all Inputs. Some options may
not be available depending on the input source.
English - 10 -
Hide quick links:
Advertisement
Table of Contents
