Resetting The Filter Display; Deactivating The Filter Display - Bosch B36ET Series Use And Care Manual

Resetting the filter
display
If the filter display is not reset, the
next required filter change cannot
be signalled by the display.
After each filter change:

Simultaneously hold down
the super cool and ice buttons
for 3 seconds.
Deactivating the filter
display
m
WARNING
To avoid serious illness or death, do
not deactivate the filter display while
using an water filter.
The appliance might be used without
a water filter. If you choose this option
replace the water filter by a water filter
substitute cartridge. In this case the filter
display might be deactivated to prevent
filter change messages.
To deactivate the filter display:

Simultaneously hold down
the setup and ice buttons for
3 seconds.
Re-activate the filter display
by pressing the super cool and
ice buttons for 3 seconds
simultaneously.
m
19