Connecting Auxiliary Audio Equipment - Sony CDX-MP70 Operating Instructions Manual

2
Press (MENU), then rotate the
./> control dial until "Name
Input" appears.
3
Press the ./> control dial.
4
Enter the characters.
1 Press (DSPL) to select the character
type.
A t a t 0 t A
2 Rotate the ./> control dial to
select the desired character.
A y B
y
1 2
y y
...
* (blank space)
3 Press the M+ button after locating
the desired character.
If you press the –m button, you can
move back to the left.
4 Repeat steps 1 to 3 to enter the
entire sentence.
5
Press the ./> control dial.
Tips
• Simply overwrite or enter "
sentence.
• To erase all sentences, press the ./> control
dial for 2 seconds after step 3.
26
C x y z
y ... y y y
! y " y # ... y
*
" to correct or erase a
Connecting auxiliary audio
equipment
You can connect auxiliary audio equipment to
this unit with the AUX IN connector.
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
Adjusting the volume level
0
y
You can adjust the volume for each connected
A
y
audio equipment.
1
Press (MENU), then rotate the
./> control dial until "AUX Level"
appears.
2
Press the ./> control dial.
3
Rotate the ./> control dial to
select the desired volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
4
Press the ./> control dial.
To deactivate "AUX-A" in the music
source display
1
Press (OFF).
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2
Press (MENU).
3
Rotate the ./> control dial until
"AUX-A on" appears.
4
Press the M+ button to select
"AUX-A off."
5
Press (MENU).
To restore the indication, select "AUX-A on."
./> control
dial