Fiat Panda 2015 Owner's Handbook Manual page 20

"FOLLOW ME HOME"
DEVICE
This allows the space in front of the
vehicle to be lit for a set time.
Activation: with the ignition key on
STOP or removed, pull the stalk
towards the steering wheel within 2
minutes from turning the engine off.
Each time the stalk is moved, the lights
stay on for an extra 30 seconds up to
a maximum of 210 seconds; then
the lights are switched off automatically.
Each time the stalk is operated, the
warning light on the instrument
panel switches on and the display also
shows a message and how long the
function will remain active.
The warning light comes on when
the stalk is first moved and stays on
until the function is automatically
deactivated. Each time the stalk is
activated it increases the time that the
lights remain on.
Deactivation: keep the stalk pulled
towards the steering wheel for more
than two seconds.
18
REAR FOG LIGHTS
Press the button, on the dashboard,
to switch on the rear fog lights.
With rear fog lights on, the
light on the instrument panel will come
on.
FOG LIGHTS/REAR FOG
LIGHTS
(for versions/markets, where provided)
The fog lights can be activated only
when the dipped beam headlights are
on.
To turn on the front/rear fog lights,
press button A fig. 19 as follows:
❒ First pressing: front fog lights on;
❒ second pressing: rear fog lamps
on;
❒ third pressing: front/rear fog lights
off.
With fog lights on, the warning light
on the instrument panel will come on
at the same time.
With rear fog lights on, the
light on the instrument panel will come
on.
warning
19
WARNING
16) The daytime running lights are an
alternative to dipped headlights for driving
during the daytime. They are compliant
in countries where is it obligatory to have
lights on during the day and permitted
in those where it is not obligatory.
17) Daytime running lights cannot replace
dipped headlights when driving at night
or through tunnels. The use of daytime
running lights is governed by the highway
code of the country in which you are
warning
driving. Comply with legal requirements.
F1D0024