Fiat Panda 2015 Owner's Handbook Manual page 14

Backrest angle adjustment
Operate lever C fig. 7 until the desired
position is reached, then release the
lever.
7
FRONT SEAT ELECTRIC
HEATING
(for versions/markets, where provided)
With the ignition key turned to MAR,
press button A or B fig. 8 respectively
to switch the function on.
To deactivate the function press the
button again.
8
12
REAR SEATS
Longitudinal adjustment
(for versions/markets, where provided)
To bring the seat to the wished
position, pull lever A fig. 9 then adjust.
F1D0008
9
Extending the luggage
compartment with fixed rear seat
3)
Proceed as follows:
❒ remove the rear shelf;
❒ move the seat belts to the side,
making sure that they are correctly
extended and not twisted;
❒ if there is a third rear seat (for
versions/markets, where provided),
release the central belt, winding the
buckle into its housing on the roof
panel;
F1D0009
❒ operate the levers at the sides of the
rear seats fig. 10 pushing them towards
the inside of the vehicle, fold the
backrest and then bring the backrest
onto the cushion.
For versions equipped with split rear
seat, the left or right part of the
backrest can be tilted.
F1D0010
10
Extending the luggage
compartment with rear sliding seat
Proceed as follows:
❒ remove the rear shelf;
❒ move the seat belts to the side,
making sure that they are correctly
extended and not twisted;
❒ using the lever A fig. 11 in the
passenger's compartment or the
central tab D in the luggage
compartment, move the seat all
forward.
F1D0034